switching between external and internal mic

Need any help using RememBird, the application or any add-ons?

switching between external and internal mic

Postby Alex on Mon Jul 11, 2011 5:02 pm

Hi All,
Thinking of buying a remembird II, I would be very grateful for answers to the following query. I can't figure it out by reading the online manual. In order to use an external mic with remembird II, you apparently have to change the software settings. But once you have done this, is it possible to switch between recording with the external and recording with the internal mic by just plugging in and out the external mic?

Thanks
Alex
Visby, Sweden
Alex
 
Posts: 2
Joined: Mon Jul 11, 2011 4:57 pm

Re: switching between external and internal mic

Postby cblair on Mon Jul 11, 2011 5:30 pm

Hi Alex,

Absolutely. The recorder senses whether or not anything is plugged in and, if it is, assumes that's the external microphone.

So the only thing you need to be careful with is if you also want to use an external speaker sometimes. When that's plugged in, the RememBird will not be able to distinguish between that and the external microphone - so be sure to unplug it if you want to record using the internal microphone.

Regards
Chris B (the inventor)
cblair
Site Admin
 
Posts: 191
Joined: Fri Apr 25, 2008 6:10 am
Location: East Sussex, United Kingdom

Re: switching between external and internal mic

Postby Alex on Mon Jul 11, 2011 8:43 pm

Hi Chris,
great, thanks so much for your prompt reply!

All the best
Alex
Alex
 
Posts: 2
Joined: Mon Jul 11, 2011 4:57 pm


Return to Support

Who is online

Users browsing this forum: No registered users and 4 guests

cron